IDENTIFY YOU

• Or register you here

• ADHERE TO planetpal.NET

Adhere to benefit from our advantages !

• Directories
• Catalogues
• See our prices

GUIDE TECHNICAL

• Wood Pallets
  • Complete description
  • The pallet
  • Types
  • Elements
  • Assembly
  • Characteristics
  • Transport
  • Light heavy ½heavy
  • Nails (fr)
  • Drying (fr)
  • Wood Standards
• Plastic pallets
• Others
• Choice of materials

• Glossary

Principal characteristics of the pallet

Chamfer

The pallets skids of a palette are chanfreinées from both directions to facilitate the passage of the wheels of the transpallet on these boards as well in ascent as in descent.

If the thickness of the bottom deck is superior to 15 mm, the edges of the pallets skid should be chamfered. Indeed, to allow the passage of a transpalette, the height of the deck should not exceed 15 mm. With chamfers, the total thickness of the bottom deck should not exceed 28 mm.

chamfer

wheel of the transpalette

he angle of the chamfer is generally 45 °. It can not exceed 50 °.

Decks are mostly chanfreinées 4 times: two chamfers on each side, placed on both intervals between three blocks or three stringers.

Palettes in 4 blocks or 4 stringers can contain 3 chamfers on each side. However, the space of blocks or stringers should correspond to the space of the forks of the transpalette.

In certain cases, to facilitate the manufacture of the palette, decks are chamfered on all their length, it avoids realizing stopped chamfers, operation which asks for a special machine with fixed chamfers.

chamfer :

• PUBLICITY

Your publicity on our banner page !